Accento Dynamica 140W Integrated Stereo Amplifier With Bluetooth Black
140W Class D Amplifier with Bluetooth, Bass & Treble control
SUPPORTS INPUTS FROM PHONO / LINE / DIGITAL / BLUETOOTH SOURCES
Classic design 70W per channel integrated class A/B amplifier with six inputs including Bluetooth, digital audio 24bit/96Khz, and even turntable phono. Full hifi component sized with remote control for a modern classic and capable home stereo amplifier powerful enough for most floor standing speakers.
Accento Dynamica ADA140BT is a versatile home stereo amplifier designed for quality HiFi audio sound reproduction.
It offers 70W of RMS power per channel @ 4Ω delivered by high power, classic transistor type Class-AB output.
Quality power supply for better audio with toroidal transformer. Shielding for the sensitive preamp audio section.
The main PCB uses old-school through-hole componentry with all driver and output transistors heat-sinked.
Equipped with six inputs, ample for most home audio setups, ideal for those who want a quality stereo amplifier.
Two RCA Stereo Line-level inputs plus a phono RIAA preamplifier input for spinning your classic vinyl records.
Bluetooth V4.0 enabled for wireless streaming from your mobile device. Removeable antenna for stable reception.
Direct digital inputs: Toslink optical and coaxial for PCM decoding up to 24bit/96KHz DAC high-definition audio.
There are two sets of RCA outputs. One is record out line level. The other is post volume for an active subwoofer.
Front panel has a convenient 3.5mm stereo input for MP3 players, etc. Headphone jack 6.35mm with speaker mute.
Illuminated push buttons for source select and power button. A modern classic design, full sized audio component.
Tone controls Bass and Treble with a Direct switch for bypassing. Loudness button for a high/low frequency boost.
Handy remote control for power, source select and adjusting the motorised volume knob. Plus Bluetooth controls.
The rear panel has gold-plated Bare-wire or 4mm speaker connection terminal outputs for 4Ω or 8Ω speakers.
All metal cabinet and aluminium front panel with an attractive brushed finish. 430x82x345mm 6.2Kg.
- Classic HiFi stereo Class-A/B amplifier topology
- 2x 70W per channel @ 4Ω, 2x 45W per channel @ 8Ω
- Circuit design and layout to optimise dynamic range
- Front controls for volume, treble, bass, balance, source
- Includes Remote Control with motorised volume knob
- 2x RCA Stereo line level inputs, 1x Phono RCA input.
- Supports digital Optical / Coaxial inputs 24bit/96KHz DAC
- Supports 1x MP3 input (via front panel 3.5mm socket)
- Supports Bluetooth audio streaming from a mobile device
- Bare-wire or 4mm connection terminals to loudspeakers
- 1x RCA (L/R) Line output and 1x RCA (L/R) REC output.
- Quality metal case, brushed anodised aluminium front panel
- Large Non-scratch rubber lined feet. 430x365x80mm 6.2Kg
Reviews
There are no reviews yet.