36W LED Batten Light Outdoor 2ft/4ft Daylight And Motion Sensor
ENSA – NON-DIMMABLE – IP65 – FROSTED LENS – NSW ESS Accepted
The ENSA™ LED batten light series comprises customisable energy efficient lighting solutions that deliver control over your lighting, without the need for a complex management system. This model features an integrated daylight & microwave motion sensor that will turn off the light and save power when the light is not in use. IP65 ingress rated and weather resistant.
- 240Vac input.
- Available in 18W (655mm long) and 36W (1260mm long) models
- With daylight detector and motion detector to turn off the light when there is sufficient ambient light or when no person is in range.
- Sealed cabinet for IP65 dust and weather resistance
Ambient Light Threshold 2000lx / 50lx / 15lx / 5lx (adjustable)
Battery Backup N/A
Beam Angle 120°
Colour Rendering Index > 80
Colour Temperature 6000K
Dimensions 655 x 108 x 85mm
Dimmed Brightness 20%
Dimming Description Always on
Dimming Timeout N/A
Emergency Power Output N/A
Equivalent Wattage 40W fluorescent
Ingress Protection IP65
Input Voltage 220 ~ 240VAC (50 ~ 60Hz)
Installation Materials Mounting clips, mounting screws & wall plugs, cable
Light Decay < 15% at 10,000 hours
Luminous Efficacy 88lm/W
Luminous Flux 1600lm
Motion Detection 360° 5.8GHz Microwave Sensor with 8m max. radius (adjustable)
NSW ESS Accepted Yes
On-Time Delay 5s / 30s / 90s / 180s (adjustable)
Operating Environment -25° ~ 40°C
Plug / Socket / Base Internal terminal block
Power Consumption 18W
Power Factor >0.9
Rated Lifespan 35,000 hours
Reflector / Diffuser Frosted diffuser
Reviews
There are no reviews yet.