SELF AMALG.TAPE-40MM WIDE 5M
Self-Amalgamating Tape 40MM X 5M
Self-amalgamating tape is a highly adhesive synthetic rubber and resin based tape that ‘cures’ to a single mass once it is taped.
Instructions
When using the tape remove the separator and gently stretch sufficiently to reduce its width by 4-5mm, and wrap with a 50% overlap. Ensure no air is trapped in the wrapping process. In cold weather warm to room temperature.
Self-Amalgamating Tape Features:
- Ideal for sealing, waterproofing and insulating
- Highly resistant to hostile environments
- For high mechanical strength use SAT2
- SAT1RD is ideal for phase colouring and will not degrade or unwrap
Conformant standards:
- UL, NEMA, IEC, JIS
Technical Data:
- Material: Resin impregnated synthetic rubber with separator paper
- Colour: Black/Red
- Thickness: Adhesive Layer 0.1mm .Main layer 1.0mm. Separator Layer 0.18
- Temperature: Storage up to 50°C , Operating -30°C to 70°C, Installing temperature >10°C
- Tensile strength: 0.02 kg/mm²
- Elongation at breaking point: Above 400%
- Breakdown voltage: 9 kV/mm thickness
- Volume resistivity: Above 1 x 1016ohm cm
- Water absorption: Less than 0.05%
- UV resistance: Exceeds ISO 1408
Ordering Information:
Part No. | Colour | Dimensions |
SAT1 | Black | 20mm x 5m |
SAT1/40MM | Black | 40mm x 5m |
SAT1-RD | Red | 20mm x 15m |
Also Available
Part No. | Description | Colour | Dimensions |
SAT2 | High Mechanical Strength – Amalgamating Tape | Black | 20mm x 10m |
Reviews
There are no reviews yet.